Tank, Silo and Stack Demolition in Orlando, FL

Our tank demolition services in Orlando, FL safely remove above ground storage tanks, silos, and smokestacks. We clean and purge tanks as required, cut and dismantle steel shells, and control fall paths for tall structures. Scrap materials are processed for recycling to keep your industrial site clean and efficient.

Wrexo Demolition Orlando provides professional tank demolition throughout Orlando, FL and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (407) 329-9529 or request your free quote.

Tank, Silo and Stack Demolition in Orlando, FL

Tank demolition, silo removal, and stack takedowns are heavy industrial jobs that affect safety, environmental compliance, and future use of your site. Wrexo Demolition Orlando focuses on this type of work across Central Florida, from fuel tank removal at distribution yards to old concrete silo and chimney stack demolition at manufacturing and agricultural facilities.

In the Orlando area, these structures are often steel fuel tanks, concrete or steel silos, and masonry or steel exhaust stacks tied into active facilities. Before we cut a single bolt, our team verifies what is in or under each structure, how close it is to utilities, and how it will behave when weakened. We treat every tank, silo, or stack as a potential confined space, a fall hazard, and a contamination risk until testing proves otherwise.

Most of our calls in Orlando come from plant managers, property owners, and contractors who need one of three things: an obsolete tank cleared before redevelopment, a damaged silo that is unsafe to keep standing, or a tall stack that must come down to meet new plans or code requirements. If any of this describes your situation, we can evaluate your site quickly and give you a demolition plan that fits your schedule and regulatory obligations.

How Tank, Silo and Stack Demolition Actually Works

Serious structural removal starts with a site and structural assessment. Wrexo Demolition Orlando reviews any available drawings, then measures plate thickness, wall conditions, and foundation type. For tanks, we confirm contents, residues, and venting. For silos, we check for internal liners, product buildup, and structural cracking. For stacks, we examine guy wires, ladders, and any attached ductwork or platforms.

Once we understand what we are dealing with, we secure the area. That usually means fencing off a fall zone, locking out nearby electrical equipment, capping or rerouting nearby gas lines, and coordinating with any ongoing operations at your facility. On tighter Orlando sites near property lines or busy streets, we design smaller drop zones and may schedule work for off hours to avoid disrupting neighbors.

The actual takedown method depends on the structure. Many steel tanks and silos in Orlando are dismantled top down using manlifts, torches, and shear attachments on excavators. We cut openings at the top, remove roof sections, then peel wall plates down in controlled sections that our machines can handle safely. Concrete silos and stacks are typically broken with high reach excavators, hydraulic hammers, and processors that bite the concrete and separate the rebar. Very tall or structurally compromised stacks may require partial saw cutting and mechanical pulling with cable equipment so they fall into a prepared area.

Throughout the demolition, we manage debris removal and separation. Scrap steel is sorted for recycling. Concrete and masonry can often be crushed for use as fill on site, which can reduce your disposal and import costs. Our crews stay in constant communication so crane operators, torch cutters, and ground crews are always working in sync.

Tank Demolition: Fuel, Water, and Chemical Tanks

Tank demolition carries extra risk because of what tanks used to hold. In Orlando we commonly remove above ground storage tanks used for gasoline, diesel, heating oil, reclaimed water, and various process chemicals. The first critical step is cleaning, purging, and gas freeing. Wrexo Demolition Orlando requires documentation that a tank is cleaned and tested for flammable vapors before hot work begins, or we bring in trusted local partners to complete that process.

We usually start by cutting large access openings to inspect the interior and verify there are no remaining solids or sludge pockets. For fuel tanks, we test for vapors again after the initial cuts. When conditions are safe, we either lift the tank off its foundation for ground level dismantling or cut it down in place, reducing the shell to manageable sections. For double wall tanks or tanks with internal baffles, we create a cutting sequence that avoids trapping sections that can drop unexpectedly.

Cost for tank demolition in the Orlando area is heavily influenced by three factors: what was stored in the tank, how thick the steel is, and access for equipment and trucks. Removing a clean water tank in an open yard is much simpler and cheaper than cutting apart a large fuel oil tank inside a tight industrial courtyard. Where contamination exists in soils or containment berms, we coordinate the demolition so that remediation crews can access the area quickly, which can shorten your overall project timeline.

If you plan to keep using the pad or area after demolition, we can remove or leave the concrete ringwall or slab depending on your design needs. We also cap and mark former pipe penetrations so future contractors know exactly where they are.

Silo Demolition: Concrete and Steel Storage Structures

Silo demolition in Central Florida is often tied to changes in agricultural operations, cement and aggregate facilities, or feed mills. Many of these silos are tall, reinforced concrete structures with aging ladders, spalled concrete, and corroded rebar. They are not safe to leave partially dismantled or to knock over informally. Wrexo Demolition Orlando designs silo removals so they come down in a predictable way that protects nearby buildings, conveyors, and workers.

For concrete silos, we may use a combination of high reach excavators, interior and exterior saw cutting, and controlled notching at the base. In some cases, we weaken a specific side so the silo can be mechanically pulled into a prepared debris zone that has been cleared and protected. Where silos are clustered together, we usually dismantle them in a sequence that always leaves stable neighbors supporting shared structures until we are ready to remove them.

Steel silos, which are common at smaller Orlando facilities, are usually taken down top down. We remove or secure roof equipment, catwalks, and dust collectors, then use torches and shears to cut vertical and horizontal seams. Product buildup on the interior can change the way a silo reacts when cut, so we probe and, when needed, discharge or vacuum out remaining material before we begin structural cuts.

A frequent concern for silo demolition clients is dust, especially at sites close to residential neighborhoods or sensitive operations. We use water spray systems and careful sequencing to keep dust migration down. If your facility has active silos next to the one we are removing, we coordinate with your staff to avoid cross contamination and to maintain your production as much as possible.

Stack and Chimney Demolition: Industrial and Commercial

Orlando and the larger Central Florida region still have many older stacks serving boilers, incinerators, and process exhaust systems. Some are unlined brick chimneys from older plants, others are steel or concrete stacks with internal liners and guy wires. Each type has its own demolition approach. Wrexo Demolition Orlando starts with a stability and access review so we know whether manned work at height is safe or if the structure must be handled almost entirely by machines from the ground.

For shorter masonry stacks with open work areas, we often use high reach equipment to bite and peel the structure down in lifts, keeping debris inside a defined footprint. Tall or slender stacks, especially those close to property lines, may require a mix of hand demolition from swing stages or man baskets and small mechanical equipment working on controlled sections. Where lined stacks are present, we remove or collapse the liner in a planned order so it does not drop unpredictably.

Guyed steel stacks are typically lowered in sections. We disconnect and control guy wires, then rig and cut segments that are lowered by crane. This avoids uncontrolled falls that could damage live equipment or adjacent buildings. Where internal flues run through a building roof, we sequence the work so roof openings are closed promptly, which is important in Orlando where heavy afternoon storms can damage exposed interiors.

Noise, vibration, and neighbor relations matter for stack demolition, especially in redeveloping industrial corridors being converted to mixed use. We can phase loud work into shorter windows, use mechanical rather than impact methods where possible, and keep you informed so you can respond to any questions from adjacent property owners.

Permits, Timeline, and What Affects Price in Orlando

Tank, silo, and stack demolition in Orlando typically requires permitting coordination with the City of Orlando or Orange County, and in some cases state level environmental agencies. Wrexo Demolition Orlando handles demolition permit documentation, including site plans, methodology descriptions, and dust and noise control plans where required. For structures tied into active industrial processes, we also coordinate with your engineering staff to confirm all live connections are properly isolated.

The typical timeline has several parts. First is assessment and pricing, which we can usually complete with a site visit and a short review of your documentation. Second is permitting and any required environmental testing, such as vapor testing or material sampling. Third is active demolition and debris removal. Simple, clean tank or silo removals can be completed in a few days once permits are in hand. Complex stack or multi structure projects can run several weeks, especially if work must be phased around ongoing plant operations.

Cost is driven by more than just size and height. Accessibility for equipment and haul trucks, the presence of hazardous residues or liners, the required method of takedown, and the disposal or recycling options all matter. For example, recycling a large volume of clean tank steel can offset a meaningful portion of the demolition cost, while contaminated concrete around a tank farm can increase disposal expenses. We provide itemized estimates that show you how each factor affects the bottom line.

Before you hire any contractor for tank demolition or similar work in Orlando, confirm that they are experienced with confined space and hot work safety, carry proper insurance for structural demolition, and understand local permitting and environmental rules. Wrexo Demolition Orlando is available to walk your site, discuss realistic options, and give you a clear path to a clean, safe, and ready to build property.